WPC decking FAQ

Typical installed WPC decking in Singapore falls around S$18–32 per sqft, depending on board grade (hollow, capped co-extruded or solid capped), subframe, access and site conditions. Actual prices vary with site conditions. Use our price calculator for an indicative range, then WhatsApp us for a site-specific quote.

For Singapore outdoor spaces, capped WPC is a strong option when you want timber look without the sanding, sealing and termite risk of natural wood. Quality varies widely — cheap uncapped boards fade and stain faster. Choose co-extruded capped boards, proper drainage and correct expansion gaps.

Dark colours can run hot under midday sun, boards expand with heat, low-grade uncapped cores can absorb moisture at cut ends, and surface scratching is possible with dragged furniture. Most issues are manageable with lighter colours, aluminium subframes where needed, and capped boards.

Yes — like tiles and dark timber, WPC surfaces warm up in direct sun. Lighter colours and textured caps stay more comfortable. Shade, outdoor rugs and pool-side light boards help. See our heat guide for practical colour advice (measured surface readings can be added once field tests are logged).

Well-installed capped boards in outdoor Singapore conditions commonly serve many years when drainage, UV exposure and board grade are right. Warranties differ by brand and usually exclude misuse, standing water and incorrect installation — always read the written terms.

Removable, non-hacking balcony finishes that keep floor traps clear are commonly discussed, but always check current HDB guidelines and your town council. Permanent hacking or corridor decking that affects fire safety is a different matter — WhatsApp us with photos if you want a site-specific read of your space.

For Singapore weather, capped (co-extruded) boards are usually the better outdoor choice: the polymer skin resists stains, moisture and fade better than uncapped boards. Uncapped may suit covered, low-stain areas on a tighter budget.

Sweep regularly, wash with mild soap and water, keep drainage clear, and avoid harsh acids or aggressive pressure washing that can damage the cap. Address mould early in shaded, damp spots.

Board grade, subframe (timber vs aluminium), roof or pool detailing, access (crane, stair carry), waterproofing condition and MCST/HDB requirements all change labour and materials. A range keeps expectations honest before a site visit.

Small jobs often carry a minimum charge because setup, delivery and framing still take a half-day or more. The published minimum is a placeholder until confirmed for your project type — ask on WhatsApp for the current figure.

Typical inclusions: site measure, subframe where needed, boards, clips/fasteners, cutting, finishing and handover clean-up. Exclusions often include MCST/HDB fees, waterproofing repairs, furniture, after-hours premiums and major access equipment unless quoted.

1 square metre ≈ 10.764 square feet. Multiply sqm by 10.764 for sqft, or divide sqft by 10.764 for sqm. Our calculator accepts both.

Yes — beyond balconies, we plan WPC for pool surrounds, roof terraces, landed gardens/patios and condo PES areas, with attention to drainage, waterproofing and board grade for each setting.

DIY tiles can work for temporary or very small covered spaces. For outdoor durability, drainage and a continuous look, installed board systems on a proper subframe usually perform better long term.

A compact balcony may finish in a day once materials are on site. Larger roof terraces, pool decks or gardens take longer depending on subframe complexity and weather. We confirm a schedule after measurement.

Yes — islandwide across HDB, condo and landed properties, subject to access and estate rules.