Published · Updated
4 min read
WPC Decking Price in Singapore (2026): Cost per sqft & sqm, With Examples
WPC decking price in Singapore as of October 2026: S$18–32 per sqft installed, Minimum job: S$1,000, tier bands, sqft↔sqm conversion and quote inclusions.

Looking up WPC decking price Singapore, price per sq ft, per m2 or how much is WPC decking usually means you want a number sturdy enough to plan a renovation budget before a contractor visits. Singapore results mix installer rate cards, retailer guides and directory listicles. Many publish overlapping installed bands around S$18–32 per square foot as of October 2026. This guide explains what that band includes, how to convert units, which board tiers sit where, how example costs by space work, and how to brief a quote without comparing boards-only SKUs to fully installed roof terraces. Use the live tool on /wpc-decking-price.
Singapore outdoor floors deal with strong UV, convective afternoon heat, monsoon deluges and near-constant humidity. Those forces fade pigments, heat dark surfaces, test slab falls and encourage biofilm wherever water sits still. Successful decks — whether timber, tile, aluminium or WPC — shed water, allow boards to move and keep cavities inspectable.
How much does WPC decking cost in Singapore?
It depends on board grade, subframe and access. As of October 2026, typical installed WPC sits around S$18–32 per sqft, with simpler hollow boards lower and solid capped pool or roof work higher. Aluminium joists, crane lifts and awkward access push quotes up. Jobs are subject to a S$1,000 minimum. Use the live calculator for an indicative band, then WhatsApp photos for a site-specific quote.
Why prices appear as ranges
Outdoor quotes bundle materials, labour, logistics and risk. Walk-up stair carry differs from driveway unloading. Roof membranes need pedestals or careful non-penetrating strategies. Solid capped boards cost more than hollow uncapped boards. MCST work-hour limits stretch calendars. A single “from $X/sqft” headline without caveats is marketing shorthand.
What installed should mean
Installed ordinarily includes labour and fasteners to a subframe. Whether the subframe itself is included must be read line by line. Pedestals, aluminium joists and timber bearers are different cost centres. Dramatically cheaper quotes may be material-only or incomplete scopes.
The S$18–32 market band
Homeowner-facing Singapore pages commonly show installed composite/WPC rates between S$18 and S$32/sqft as of October 2026. Lower numbers map to simpler hollow boards and easy access. Higher numbers map to denser capped boards, aluminium subframes, wet-zone detailing or awkward logistics. Far-below-band complete-system claims deserve scope scrutiny.
Sqft and sqm conversion
Use 1 sqm ≈ 10.764 sqft. Example: S$22/sqft ≈ S$237/sqm. Convert both quotes to one unit and confirm both are installed scopes before ranking them.
Board tier bands
Standard hollow S$18–22/sqft; capped co-extruded S$20–27/sqft; solid capped S$26–32/sqft. These tiers power our calculator and live in site config. Ask how many sides are capped, which clip system is used and which joist centres the warranty assumes. See capped vs uncapped.
Example costs by space
A condo PES of about 120 sqft at S$20–27/sqft comes to roughly S$2,400–3,240. A roof terrace of about 250 sqft at S$24–32/sqft is about S$6,000–8,000. A pool surround of about 180 sqft at S$26–32/sqft is about S$4,680–5,760. A landed patio of about 200 sqft at S$20–27/sqft is about S$4,000–5,400. Jobs are subject to the S$1,000 minimum. See matching /applications pages for detailing.
Inclusions, exclusions and minima
Often included: measure, boards, clips, cutting, labour, tidy handover; subframe only if listed. Often excluded: MCST/HDB fees, waterproofing repairs, furniture, after-hours premiums, crane unless listed. Minimum job: S$1,000 — small areas that calculate below this floor are quoted at the minimum.
Cost drivers checklist
Board grade; subframe; access; geometry; estate hours; substrate prep; layout complexity. Protect spend with sound install: /wpc-decking-installation.
FAQ
How much per sqft? Plan around S$18–32 installed as of October 2026, then refine. Minimum job: S$1,000.
How much per m2? Convert with ×10.764.
GST included? Ask explicitly.
DIY cheaper? Sometimes short-term; see tiles vs boards.
Putting this into action
A practical buying sequence: photograph the space and nearest drain; measure roughly in sqft or sqm; note whether the area is covered; shortlist capped boards for open air; run the price calculator for an indicative band; WhatsApp +65 8991 1078 with property type and area type.
Installation quality decides lifespan as much as board chemistry. Joist centres must match the profile, clips must seat fully, perimeter gaps must follow tropical heat charts, and floor traps must remain serviceable. Roof membranes must not be treated as screw boards. Pool coping interfaces need a path for splash water.
Routine care is simple but not optional: sweep grit, wash with mild soap, keep joints free of compacted leaf mush, and avoid harsh acids or aggressive pressure washing that can damage caps. Shaded decks need earlier attention to biofilm.
Related reading: /wpc-decking-price, /what-is-wpc-decking, /wpc-decking-pros-and-cons, /wpc-decking-buyer-guide, /wpc-decking-installation, /applications.
Ready for a quote on your space? WhatsApp +65 8991 1078 or use /contact.
How do I get a WPC decking quote?
Tell us your property type and area — we reply on WhatsApp with next steps and an indicative range.